Climate chambers are often used in the scope of stress tests and stability tests. Some tests on goods require the testing of the effects of various climatic conditions on the material to be tested. For the test to be successful, the conditions in the interior of the chambers must be constantly varied in a controlled manner and challenge the sample’s integrity. That's why the BINDER dynamic climate chamber was born, it simulates various climatic conditions and extreme conditions within a brief time span. From extreme heat to extreme cold, the results of the tests yield concrete information on the durability of the sample.
1. Series MKF: Dynamic climate chambers for rapid temperature changes with humidity control
A MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation.
1.1. Features
- - Temperature range: -40 °C to 180 °C
- - Humidity range: 10*) % to 98 % RH
- - Integrated water-storage tank, 20 liters (not MKF056) 4 zero-voltage relay contacts
- - APT.line™ preheating chamber technology
- - Intuitive touchscreen controller with time-segment and real-time programming with integrated chart recorder
- - Internal data logger, measured values can be read out in open format via USB
- - Programmable condensation protection for test material
- - Heated door/viewing window with LED interior lighting
- - Humidity regulation with capacitative humidity sensor and vapor humidification
- - APT-COM™ Basic Edition communication software
- - Troubleshooting system with visual and audible alarms
- - Access port with silicone plug (056, 115, 240: 50 mm, left)
- - 2 access ports with silicone plugs (720: 80 mm, left and right)
- - Class 2 adjustable temp. safety device with visual alarm
- - 4 castors, two with brakes
- - Computer interface: Ethernet
- - Adjustable ramp function
- - Real-time clock
- - Alarm notification in the event of insufficient water in fresh water tank (Models 115, 240, 720)
- - Complete safety connection kit for water supply and drainage, up to 1 m height
- - Inner chamber made of stainless steel with 1 SS Rack
- - CFC-free refrigerant R-452A
*) 5 ....98% r. H. with optional orderable compressed air dryer (Automotive Tests)
1.2. Technical data
2. Series MKFT: Dynamic climate chambers for rapid temperature changes with humidity control and extended low temperature range
The environmental simulation cabinet of the MKFT series is the specialist for dynamic climate changes between -70 °C and 180 °C. Large power reserves and fast cooling make it a high-class product for complex standard-compliant climate tests.
2.1. Features
- - Temperature range: -70 °C to 180 °C
- - Humidity range: 10*) % to 98 % RH
- - Integrated water-storage tank, 20 liters
- - 4 zero-voltage relay contacts
- - APT.line™ preheating chamber technology
- - Programmable condensation protection for test material
- - Intuitive touchscreen controller with time-segment and real-time programming and integrated chart recorder
- - Internal data logger, values can be read out via USB
- - Heated door/viewing window with LED interior lighting
- - Humidity regulation with capacitative humidity sensor and vapor humidification
- - APT-COM™ Basic Edition communication software
- - Troubleshooting system with visual and audible alarms
- - Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
- - Access port with silicone plug (115, 240: 50 mm, left)
- - 2 access ports with silicone plugs (720: 80 mm, left and right)
- - 4 castors, two with brakes
- - Computer interface: Ethernet
- - Adjustable ramp function
- - Real-time clock
- - Alarm notification in the event of insufficient water in fresh water tank
- - Complete safety connection kit for water supply and drainage, up to 1 m in height
- - Inner chamber made of stainless steel with 1 SS-rack
- - CFC-free refrigerants R-452A and R-23
*) 5 ....98% r. H. with optional orderable compressed air dryer (Automotive Tests)
2.2. Technical data
Summary,
BINDER environmental chambers are perfectly suited to material testing under dynamic conditions.
The standard rapid alternation speeds of around 5 K/min make standard-compliant testing possible. An environmental simulation chamber of the MK and MKT Series is suitable for complex temperature profiles in the range of -40 °C or -70 °C to 180 °C.
MKF and MKFT Series of dynamic climate chambers not only make material testing in this temperature range possible, but can also regulate humidity in the range of 10 % to 98 % RH.
Do you have questions about our products and services that are not answered on this website? Please contact GPower Vietnam for more detailed answers and solutions!
